SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Parts for Forklift - Unavoidably, forklift components would eventually wear out and require replacing. The choice of buying new components can become expensive so another idea is to buy used components. This can save much cash eventually. It is a good idea to purchase used lift truck components that have been reproduced. These components will ensure that you are getting parts that would work for a long time and be productive.
Remanufacturing worn out or broken components is a cheaper way in general than rebuilding. With rebuilding parts, just the parts which are worn out or broken get replaced, which means that other wearable parts may break down soon after acquisition.
Remanufacturing on the other hand provides the best assurance for used components. Reproduced parts are taken apart and cleaned and then all wearable pieces are changed. All wearable parts are replaced regardless of age or wear which is another reason why remanufactured components on the whole perform so much better. Whichever part within the part is new and this offers much longer life to the used part. Depending on the lift truck components which are being redone, the cleaning process and the entire remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Different engine components like for instance rings, pistons, spark plugs, valves, valve springs, and filters can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are one more thing that is oven cleaned after being disassembled. The transmission is then washed. A complete inspection is done so as to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts utilized on transmission parts meet OEM specifications.
A few components like torque converters, the alternator, the water pump, the starter and steer axles could obtain longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This card can likewise be remanufactured with replacing all aged and worn out parts. Not like various lift truck components the control card could only have the worn and aged components replaced.
Parts that are reproduced have to be thoroughly inspected upon reassembly to guarantee they are in good condition previous to being sold. When buying these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain bigger components such as steer axles, engines and transmissions, OEM specification replacement components must be utilized.
The forklift dealer could guarantee that the components they have remanufactured meet the OEM specifications. This will also guarantee the components meet industry standards. Lots of details go into remanufacturing second-hand components. This attention to detail provides more serviceability out of reproduced parts compared to the parts that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Grand Prairie, Texas
forkliftpartsgrandprairie.com
Email Us
About Us